Facebook
X
Pinterest
Copy Link
With the hot days of the season upon us, its time to dive in! First things first…here is a helpful how to list on opening your pool.
Spring is in full bloom and this can mean a lot of things for many different people. For example, if you own a pool you’re surely thinking (probably dreading) about opening it for the season. There is nothing like watching all your loved ones enjoying its crisp coolness but they don’t know how much work goes into getting it ready. I am here to bring optimism to the equation and tell you that opening your pool doesn’t have to be as horrible as you anticipate.
I came across this great article from Popular Mechanics that will definitely help guide you in your efforts. I’ve highlighted a couple of steps below.
1) Don’t Empty Your Pool
According to the article, you should never have to completely empty your pool of the water that had been sitting from the past season. Exceptions to this include if you neglected to cover it or if you need to do any actual construction work to it. Why you ask? Apparently, if you remove all of the water you could run the risk of your pool lifting since it doesn’t have the weight of the water to hold it down. What that ultimately might result in is you needed to replace the whole thing.
2) Cleaning Your Pool and Water
The most basic way to start cleaning your pool and its water is by buying a chemical opening kit, or by shocking it. Then, change all the filtration systems and clear all of the baskets. You should also take this time to remove any plugs you may have put in place last year. During this step you should still have your pool cover on.
3) Refilling Your Pool
If your pool is running low on water, feel free to top it off at this time. However, this should only be done after you have replaced your filters. Once your pool is filled to the desired amount, you can take a sample to your local pool store where they will test it for you. Some places do it for free, but if not, don’t skip this step because it is super important to make sure your water is swim ready otherwise it could be dangerous.
4) Get Ready for Fun in the Sun
Your pool’s filter should be cleaned daily until the water appears clear. A ready pool means that you can see the bottom without any issues. You may need to continuously add chlorine to help you reach the perfect balance.
5) Dive In
Once the water is completely clear and all of the water levels are good you can take off the cover. Taking it off any sooner may prove counterproductive as debris may disrupt your process. Once you’ve gotten to this point, invite the neighborhood (well maybe not the whole neighborhood) and enjoy your summer!
Its that time again! Hot summer days are upon us and its time to dive in! First things first though…time to open that pool up!
The sun is shining and the swimming pool season is about to kick off. Here is a guide to help you open your pool for the season.
Spring is in full bloom and this can mean a lot of things for many different people. For example, if you own a pool you’re surely thinking (probably dreading) about opening it for the season. There is nothing like watching all your loved ones enjoying its crisp coolness but they don’t know how much work goes into getting it ready. I am here to bring optimism to the equation and tell you that opening your pool doesn’t have to be as horrible as you anticipate. I came across this great article from Popular Mechanics that will definitely help guide you in your efforts. I’ve highlighted a couple of steps below.
1) Don’t Empty Your Pool
According to the article, you should never have to completely empty your pool of the water that had been sitting from the past season. Exceptions to this include if you neglected to cover it or if you need to do any actual construction work to it. Why you ask? Apparently, if you remove all of the water you could run the risk of your pool lifting since it doesn’t have the weight of the water to hold it down. What that ultimately might result in is you needed to replace the whole thing.
2) Cleaning Your Pool and Water
The most basic way to start cleaning your pool and its water is by buying a chemical opening kit, or by shocking it. Then, change all the filtration systems and clear all of the baskets. You should also take this time to remove any plugs you may have put in place last year. During this step you should still have your pool cover on.
3) Refilling Your Pool
If your pool is running low on water, feel free to top it off at this time. However, this should only be done after you have replaced your filters. Once your pool is filled to the desired amount, you can take a sample to your local pool store where they will test it for you. Some places do it for free, but if not, don’t skip this step because it is super important to make sure your water is swim ready otherwise it could be dangerous.
4) Get Ready for Fun in the Sun
Your pool’s filter should be cleaned daily until the water appears clear. A ready pool means that you can see the bottom without any issues. You may need to continuously add chlorine to help you reach the perfect balance.
5) Dive In
Once the water is completely clear and all of the water levels are good you can take off the cover. Taking it off any sooner may prove counterproductive as debris may disrupt your process. Once you’ve gotten to this point, invite the neighborhood (well maybe not the whole neighborhood) and enjoy your summer!
